Vap WL Delux PIR LED Alu
MODEL: 89438
INTRODUCTION
The Light incorporates a PIR (Passive Infra Red) sensing device which
connuously scans a preset operang zone and immediately switches
the light on when it detects movement in that area. This means that
whenever movement is detected within the range of the sensor the
light will switch on automacally to illuminate pathways, steps,
paos, porches, or whatever area you have selected to light for rea-
sons of safety, convenience or security.
While there is movement within range of the unit the light will
remain on.
WHILE TO FIT YOUR LIGHT
To achieve best results, we suggest you account the following points:
Ideally the Light should be mounted 1.8 to 2.5 meters (6 to 8)
above the area to be scanned (refer Fig.1A).
To avoid damage to unit-do not aim the sensor towards the sun.
To avoid nuisance triggering, the sensor should be directed away
from heat sources such as barbecues, Air-condioners, other
outside lighng, moving cars and flue vents.
To avoid nuisance triggering, keeping away from the area of strong
electromagnec disturbance.
Do not aim towards reflecve surfaces such as smooth white
walls, swimming pools, etc. The Security light scanning specifica-
ons (Max. 10 meters at 130°) may vary slightly depending on the
mounng height and locaon. The detecon range of the unit
may also alter with temperature change.Before selecng a place
to install your light you should note that movement across the
10M6M2M
Fig.1(A) Detection Range
2.5M
130°
Fig.1(C) NOT GOOD
Fig.1(B) OK