Gebruikershandleiding Emerson Wasmachine 3-9000-744 [27/66 Pagina's]

Emerson wasmachine 3-9000-744

Operation Manual Section 3: Tool requirements

3-9000-744 Rev F September 2013

Tool list for the extractor tool with T-slot extractable transducers 13

Section 3: Tool requirements

3.1 Tool list for the extractor tool with T-slot

extractable transducers

Molykote III is a trademark of Dow Corning Corporation, U.S.A.

Table 3-1 Extractor tool list for T-slot extractable transducers

Tool Tool requirement

3/4” Allen wrench Fits cap screws (Z).

5/16” Allen wrench Fits cap screws that attach the transducer mount (E) to the meter housing.

3/32” Allen wrench Fits the extractor tool valve assembly (H) handle stop peg set screw (HH)

1/16” Allen wrench Fits the transducer holder (K) and transducer stalk assembly (D) set screws (W).

¾” x ¾” open/box wrench

Fits nuts (X) which attach the piston assembly (P) to the lubricator chamber assembly (M).

¼” open end wrench

Fits lubricator chamber extractor rod (N) hexagon nut and transducer holder (K) hexagon

end.

Molykote 111

Valve lubricant and sealant to lubricate O-rings before installation.

Nickel Anti-Seize

(P/N 9-9960-134)

Anti-seize thread compound for transducer holder (K).

Screw driver - flat blade To adjust the pressure regulator (V) adjustment screw.

Liquid leak detection fluid Check all joints for sealing integrity. (Not provided by Daniel Measurement and Control.)